Posted: Mon Dec 04, 2006 9:06 pm Post subject: Kodicom 4400R pulsing video output problem
I am a tech working for a company that supplies DVRs to small and medium business's, and untill now we havent had a problem with these kodicom cards, but that was untill we started using the video out port on the cards.
we are using the video out to cycle through all of the active cameras, 4 seconds for each camera, much like you would see in a gas station. the problem is that the video being displayed is pulsing when the picture has any bright reds or bright blues in it, like if there was a parking lot you would see a red truck pulsing, but nothing else. also it is not pulsing on the server or on recorded video.
as we do hundreds of video servers per year, this problem is becomming bigger and bigger, we have tried different mainboards, cameras, tvs/monitors, shielded cables, precision power supplies for both cameras and computer, about everything in the book. with no luck.
One thing i have noticed though, is that if i end the diginet task, the pulsing stops and it is a perfect picture, but it doesnt cycle the cameras anymore (obiously). which leads me to beleave its either a software thing, or a driver issue. these cards are installed using the DVR880 driver, but many of our other servers use the 416 driver, same problems. diginet site version 4.110
are there any work arounds for this? its to the point where some big ticket clients are getting frusterated with sub par performance.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum