Posted: Fri Jul 22, 2005 6:37 pm Post subject: DVR and 4channle quad(help)
hi all
maybe you guys can help me witht his ,
okay so i have a dvr system , a kmc4400R , 4 channle , runing 4 cameras . its working fine , i decided to add a 4 channle quad to the system so i can watch all for camera on TV moniter all cams the same time , so i bought 4 BNC splitter (male ,female , male ) T , i pluged the Female side of the BNC splitter directly on the quad then i ran cable from the frirst end of the bnc spliter to the computer and the i ran cable from the second end of the BNC spliter to the camera .
now i can see all 4 cams on the tv and the computer , but the video on the computer is now alot darker , i think i lost some quilty when i used a bnc splitter , am looking for some thing that will post the singal and split in the same time , 1 in 2 out or for the 4 cameras , 4 in and 8 out , OR , 1 in 1 out , and i can use 4 of them , one for each camera .
am not really sure what to look for . amplifier? , distrubtor? or what?.
please help me out in this one
thank you in adavance
Joined: 01 Dec 2007 Posts: 0 Location: New York City
Posted: Sun Dec 02, 2007 10:04 pm Post subject:
check your video terminations - it sounds like you double terminated the video signal - you have 75 ohms terminations in two places. It is not a wise idea to use T connectors to begin with - use the looping options from the DVR, and if that is not an option - use a video amplifier which has more than one output channel...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum